How to replace a failed hard disk from Linux RAID

Suppose /dev/raid1 consists of two bootable physical drives  /dev/hde1 and /dev/hdf1 and /dev/hdf1 has failed. Here are the steps to replace the failed /dev/hdf1.

Step One: confirm that /dev/hdf1 failed

# cat /proc/mdstat

You should see [U_] instead of [UU] in degraded RAID1 array.

 

Step Two: remove the failed disk

# mdadm   –manage /dev/raid1   –fail /dev/hdf1

# mdadm –manage /dev/raid1   –remove /dev/hdf1

 

Step Three:  shutdown the system and install a new disk

# shutdown -h now

# physically install new disk

# boot up the system

 

Step Four:  add the new disk  /dev/hdf

#  sfdisk -d /dev/hde | sfdisk /dev/hdf

# mdadm –manage /dev/raid1  –add /dev/hdf1

 

Step Five: wait for /dev/hde and /dev/hdf  to become fully synchronized

#  cat /proc/mdstat

 

 

Advertisements