How to make software RAID on Linux

RAID is redundant arrays of inexpensive disks.  In this article, we will show you how to implement RAID 1 (disk mirroring) where data is duplicated on two disks (either HDD or SSD) simultaneously.

Step One: Use two disk partitions that are of approximately the same size. For example, /dev/hde1, /dev/hdf1

Step Two:  Set the type of each the disk parition to “Linux raid autodetect”

# fdisk   /dev/hde
Command (m for help): m

p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition’s system id

Command (m for help): t
Partition number (1-5): 1
Hex code (type L to list codes): L

16 Hidden FAT16 61 SpeedStor f2 DOS secondary
17 Hidden HPFS/NTF 63 GNU HURD or Sys fd Linux raid auto
18 AST SmartSleep 64 Novell Netware fe LANstep
1b Hidden Win95 FA 65 Novell Netware ff BBT
Hex code (type L to list codes): fd
Changed system type of partition 1 to fd (Linux raid autodetect)

Repeat this step for /dev/hdf1:
# fdisk  /dev/hdf
… (similar to /dev/hde1) …

Step Three: create the RAID set of type 1

# mdadm  –create  –verbose  /dev/raid1  –level=1 \
–raid-devices=2  /dev/hde1  /dev/hdf1

# cat /proc/mdstat   (to confirm it is created)

Step Four: format the new RAID set

# mkfs.xfs   /dev/raid1

Step Five: create config file

On Centos, Redhat, Fedora:
# mdadm –detail –scan > /etc/mdadm.conf

On Debian, Ubuntu:
# mdadm –detail –scan > /etc/mdadm/mdadm.conf

Step Six: mount the RAID set
# mkdir  /mnt/raid1
# vi  /etc/fstab:
/dev/raid1    /mnt/raid1     xfs      defaults     1 2
# mount  -a

You can check the status of all devices:
# cat  /proc/mdstat

Linux software RAID provides redundancy across hard disks, but it is slower than a hardware-based RAID disk controller, which is usually done via the system BIOS and transparent to Linux.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s